Or call our technical support: +31852080825

Available Monday through Friday from 7AM to 3:30PM CET
Please create a ticket before calling and keep the ticket number at hand.
At the moment we are only offering support in English, so we kindly ask you to address your issue in English.
Start a new topic

Installation windows 10


I try to use a Leapfrog on Windows 10 and feel a bit overwhelmed with the quantity of information of the manual.

Mine looks like a Creatr HS and has two extruders but no screen on the printer.

I installed the last version of Arduino and the Repetier Host for Leapfrog.

Can I use the last version of the Arduino software?

It seems that some manual commands must be entered to install the driver, isn't there any video that could help me with this part; I am not used to these manual commands.

Any help would be welcome.

Thank you,

Can I use Cura with a Leapfrog?

Is there any advantage of using Curaslicer instead of Slic3r? and if it is the case, how do I insert it into repetier?

Regarding your questions about slicing software and the Creatr HS.

Using Cura , Slicer, Magics, etc is possible as long as you only generate the gcode in order to print it in stand alone mode.

However trying to use one of these open source slicing software to connect your PC to your printer will not be possible.

The only slicing software which can connect you HS printer to the PC is Simplify 3D or the Creatr software powered by Materialise.

The problem is Leapfrog does not support any other software besides Simplify 3D and the mentioned Creatr software so there are no available print profiles for the HS printer for Cura, Slicer, etc.

Login or Signup to post a comment

User Manual

Quick Start Guide

Print Settings

Print settings in the Creatr Software can be directly updated in under 'print'.

The latest Simplify 3D profiles can be downloaded using the following links:

Bolt - Simplify3D settings

Bolt - Sync and Mirror Profile
Bolt - PLA, ABS Flex Profile
Bolt - Flex Profile V.1.1
Bolt - PolyPropylene Profile

Bolt Pro - Simplify3D settings

Bolt Pro - V1.1 - PLA, EPLA, Hybrid, PET-G Profile
Bolt Pro - V1.1 - Flex Profile
Bolt Pro - V1.1 - ABS Nylon Profile
Bolt Pro - V1.1 - PolyPropylene Profile
Bolt Pro - V1.1 - SS(0.5mm) Carbon, Wood Profile

To use the profiles, choose File, then Import FFF Profile and be sure to select the correct profile in your process. You can also watch this video.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Request more information on the Bolt (Pro) firmware and how to update this via the Ticket System

Bolt Firmware

Download the Bolt 2.8.2 firmware here

Bolt Pro Firmware

Download the Bolt Pro 2.8.2 firmware here

Bolt (Pro) Video Library