Or call our technical support: +31 (0) 172 503 622

Available Monday through Friday from 8AM to 4:30PM CET
Please create a ticket before calling and keep the ticket number at hand.
At the moment we are only offering support in English, so we kindly ask you to address your issue in English.

Software Solutions

Reflash the Bolt and Bolt Pro software directly to SD-card
Please download 20190812_BoltPro_v1.3.2.zip and follow follow the SD card Flash instructions to reinstall the Bolt software directly to the SD-card. Ple...
Mon, 25 Nov, 2019 at 7:58 PM
How to set up a static IP address on the Leapfrog Bolt?
                    Hello and thank you for choosing the Leapfrog BOLT for your printing needs. Setting the static IP can be done as follows: Click th...
Thu, 29 Jun, 2017 at 7:35 AM
Bolt (Pro) firmware flash
!!Warning uploading the wrong firmware will damage the machine. Please pay close attention that you select the Bolt_firmware for the Bolt and The correct Bo...
Fri, 10 Aug, 2018 at 3:52 PM
Retrieve the Debug logfiles
This solution will describe how to retrieve the logfiles from the Bolt and Bolt Pro. Please read trough all the steppes before you start. Methode 1: Re...
Wed, 4 Jul, 2018 at 12:22 PM
Bolt (Pro) Factory reset
THE FOLLOWING STEPS SHOULD ONLY BE DONE IF INSTRUCTED BY LEAPFROG SUPPORT You can perform a factory reset in 3 steps. On the front of the machine is th...
Mon, 16 Sep, 2019 at 4:21 PM
Bolt pro Update error
Step 1 – Connect the keyboard Make sure the machine is on and connect a USB keyboard in the front USB hub of the Bolt Pro Press the Ctrl+Alt+F1 keys all a...
Thu, 25 Oct, 2018 at 9:54 AM
Bolt Pro screen rotated
Please make sure you are running at least software version 1.3.0 Step 1 – Connect the keyboard to the Bolt and enter Linux Turn on the Bolt and wait f...
Fri, 5 Oct, 2018 at 4:05 PM

User Manual

Quick Start Guide

Print Settings

Print settings in the Creatr software can be directly updated in under 'print'.

The latest Simplify 3D profiles can be downloaded using the following links:

Bolt Pro - Simplify3D settings

Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO EPLA
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO ABS
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO EPLA MIRROR-SYNC
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO HIPS-ABS
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO PETG
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO PVA-EPLA.

To use the profiles, choose File, then Import FFF Profile and be sure to select the correct profile in your process. You can also watch this video.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Go to firmware instruction page

Request more information on the Bolt (Pro) firmware and how to update this via the Ticket System

Bolt (Pro) Video Library

The following instruction videos van be found here or on youtube: