Software - Simplify3D

Print Settings (.FFF)
Simplify3D Print Settings  To ensure that your Simplify3D is set-up properly for your device, we advice you to use the latest print settings. The print set...
Wed, 14 Jul, 2021 at 9:25 AM
Printing Modes: Normal / Sync mode / Mirror mode Simplify3D
The Leapfrog Bolt (PRO) has two printheads, which offers the possibility of printing in different modes. 1. Normal Single extruder One or...
Tue, 20 Jul, 2021 at 3:04 PM

User Manual

Quick Start Guide

Print Settings

Print settings in the Creatr software can be directly updated in under 'print'.

The latest Simplify 3D profiles can be downloaded using the following links:


Bolt Pro - Simplify3D settings

Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO EPLA
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO ABS
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO EPLA MIRROR-SYNC
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO HIPS-ABS
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO PETG
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO PVA-EPLA.

To use the profiles, choose File, then Import FFF Profile and be sure to select the correct profile in your process. You can also watch this video.

Demo Print Downloads

Drivers Downloads

Slicer Software

Firmware Downloads

Go to firmware instruction page

Request more information on the Bolt (Pro) firmware and how to update this via the Ticket System

Bolt (Pro) Video Library

The following instruction videos van be found here or on youtube: