Firmware

Update Machine Firmware (Motor Control Board) Bolt Pro
!!Warning uploading the wrong firmware will damage the machine. Please pay close attention that you select the Bolt_firmware for the Bolt and The correct Bo...
Wed, 11 Mar, 2020 at 8:47 AM
Update Machine (UI) Software V1.3.2
Compatible with:  Leapfrog Bolt  Leapfrog Bolt PRO Leapfrog Xcel Description:  Please find attached the instructions on how to Manually "Flash&...
Fri, 18 Aug, 2023 at 11:54 AM

User Manual

Quick Start Guide

Print Settings

Print settings in the Creatr software can be directly updated in under 'print'.

The latest Simplify 3D profiles can be downloaded using the following links:


Bolt Pro - Simplify3D settings

Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO EPLA
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO ABS
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO EPLA MIRROR-SYNC
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO HIPS-ABS
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO PETG
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO PVA-EPLA.

To use the profiles, choose File, then Import FFF Profile and be sure to select the correct profile in your process. You can also watch this video.

Demo Print Downloads

Drivers Downloads

Slicer Software

Firmware Downloads

Go to firmware instruction page

Request more information on the Bolt (Pro) firmware and how to update this via the Ticket System

Bolt (Pro) Video Library

The following instruction videos van be found here or on youtube: