Or call our technical support: +31 (0) 172 503 622

Available Monday through Friday from 8AM to 4:30PM CET
Please create a ticket before calling and keep the ticket number at hand.
At the moment we are only offering support in English, so we kindly ask you to address your issue in English.

Maintenance

Calibrating Bed and Printheads
This solution article will describe how the bed and both printheads can be calibrated manually on a Leapfrog Bolt and Leapfrog Bolt PRO. Leapfrog Step 1...
Tue, 11 Feb, 2020 at 9:26 AM
Maintenance Schedule
Please find the following document available for download below: V1.5 Bolt (PRO), 20180619, Maintenance Schedule.pdf
Thu, 6 Feb, 2020 at 8:39 PM
Clogged Hot End
Please follow the attached instructions if you are experiencing a clogged hot end. 
Fri, 21 Feb, 2020 at 3:45 PM
Replacement: E3D V6 Hot End
Please follow the attached instructions to  - Assemble - Install - Hot Tighten  the E3D V6 Hot Ends on a Leapfrog Bolt PRO.
Mon, 10 Feb, 2020 at 12:16 PM
Calibrating: Wipers
In the attachment you will find the document that describes how to calibrate the wiper blades. The wiper blades are responsible for removing filament that i...
Tue, 11 Feb, 2020 at 10:52 AM
Clogged Printhead Hardware Checklist
If you are experiencing a clogged extruder during a print job and need help, then please have a look at this solution article. This article will focus on th...
Wed, 15 Jul, 2020 at 6:31 PM
First layer adhesion tips
Achieving a good adhesion on the print bed is beneficial for the print quality of each print. If the distance between the nozzle and print bed is too big, t...
Tue, 3 Mar, 2020 at 9:11 AM
Cleaning Extruder Drive Gear
In the attachment you will find the document that describes how to clean the extruder drive gear. The extruder drive gear is in direct contact with your fil...
Tue, 11 Feb, 2020 at 10:35 AM
BuildTak Surface Replacement
This solution article will explain when and how to replace the BuildTak Surface. This is surface is part of the magnetic Flexplate system available on Leapf...
Mon, 13 Jul, 2020 at 11:40 AM

User Manual

Quick Start Guide

Print Settings

Print settings in the Creatr software can be directly updated in under 'print'.

The latest Simplify 3D profiles can be downloaded using the following links:


Bolt Pro - Simplify3D settings

Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO EPLA
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO ABS
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO EPLA MIRROR-SYNC
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO HIPS-ABS
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO PETG
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO PVA-EPLA.

To use the profiles, choose File, then Import FFF Profile and be sure to select the correct profile in your process. You can also watch this video.

Demo Print Downloads

Drivers Downloads

Slicer Software

Firmware Downloads

Go to firmware instruction page

Request more information on the Bolt (Pro) firmware and how to update this via the Ticket System

Bolt (Pro) Video Library

The following instruction videos van be found here or on youtube: