Or call our technical support: +31852080825

Available Monday through Friday from 7AM to 3:30PM CET
Please create a ticket before calling and keep the ticket number at hand.
At the moment we are only offering support in English, so we kindly ask you to address your issue in English.
Start a new topic

Problem, won't answer to commands from Repetier-Host

Hi! I have suddenly got the problem that the printer does not answer to commands from the Repetier-Host software. It is connected but still does not work. It seems that there are jobs waiting since it says "10 commands waiting" in the upper right corner in the manual control window. Maybe it would help if I could clear the cache in some way? Any other ideas? Regards, Anders

2 people have this problem

Dear Anders S.

This issue is usually caused by a drivers error. Please check this solution to find out how to install them successfully. At the same time, the Repetier 0.95F version needs to be installed.

 

i know this is old, but i just had similar issue and wanted to post my solution for the next poor sucker. I have q3d one up printer that would connect to repieter host but not run the extruder or motors... Turns out the issue was in the physical wiring of power. Specifically the 2 red and 2 black (thick wires) had a bad connection and the board could not power the motors. redid the connections and i was good.
Login or Signup to post a comment

User Manual

Quick Start Guide

Print Settings

Print settings in the Creatr Software can be directly updated in under 'print'.

The latest Simplify 3D profiles can be downloaded using the following links:

Bolt - Simplify3D settings

Bolt - Sync and Mirror Profile
Bolt - PLA, ABS Flex Profile
Bolt - Flex Profile V.1.1
Bolt - PolyPropylene Profile

Bolt Pro - Simplify3D settings

Bolt Pro - V1.1 - PLA, EPLA, Hybrid, PET-G Profile
Bolt Pro - V1.1 - Flex Profile
Bolt Pro - V1.1 - ABS Nylon Profile
Bolt Pro - V1.1 - PolyPropylene Profile
Bolt Pro - V1.1 - SS(0.5mm) Carbon, Wood Profile

To use the profiles, choose File, then Import FFF Profile and be sure to select the correct profile in your process. You can also watch this video.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Request more information on the Bolt (Pro) firmware and how to update this via the Ticket System

Bolt Firmware

Download the Bolt 2.8.2 firmware here

Bolt Pro Firmware

Download the Bolt Pro 2.8.2 firmware here

Bolt (Pro) Video Library