3D Models

Replacement parts or upgrades that can be 3D Printed.

Filament pressure thumbscrew Gauge
Part: Filament pressure thumbscrew Gauge V4.STL Compatible with:  Leapfrog Bolt  Leapfrog Bolt PRO Leapfrog Xcel Description:  This Filament pressu...
Thu, 27 Feb, 2020 at 4:39 PM
Fan duct
Part: 3D-P-180424-P1 Bolt - R2.STL Compatible with:  Leapfrog Bolt  Leapfrog Bolt PRO Description:  These fan ducts can be mounted below the radial ...
Fri, 29 Apr, 2022 at 9:27 AM
Filament waste bucket
Part: V2 Filament Bucket Bolt PRO [Left].STL V2 Filament Bucket Bolt PRO [Right].STL Compatible with:  Leapfrog Bolt Leapfrog Bolt PRO Description: ...
Wed, 19 Feb, 2020 at 9:39 PM
Printhead Glands
Parts: 3DP Gland Lower.STL 3DP Gland Upper.STL Compatible with:  Leapfrog Bolt  Leapfrog Bolt PRO Description:  These printhead glands are used...
Tue, 29 Jun, 2021 at 10:10 AM
Transportation Belt Clamp
Part: Bolt PRO Belt clamp V17.0.STL Compatible with:  Leapfrog Bolt  Leapfrog Bolt PRO Description:  These timing belt clamps (HTD-3M) are designed ...
Wed, 5 Feb, 2020 at 8:32 PM
PTFE Tube Clamp
Part: V5 Double PTFE Clamp.STL Compatible with:  Leapfrog Bolt PRO Description:  When printing from an external filament spool holder, it might be th...
Mon, 10 Feb, 2020 at 10:44 AM
RJ45 Bracket
Part: RJ45 alignment clip R7 [HEAD PCB V3].STL Compatible with:  Leapfrog Bolt (only when equipped with HEAD PCB V3) Leapfrog Bolt PRO Description:  ...
Mon, 10 Feb, 2020 at 10:09 AM
Filament Spool adapter
Part: Bolt (PRO) Filament Spool Adapter V2.STL Compatible with:  Leapfrog Bolt  Leapfrog Bolt PRO Description:  These Filament Spool Adapters can be...
Thu, 6 Feb, 2020 at 10:17 PM

User Manual

Quick Start Guide

Print Settings

Print settings in the Creatr software can be directly updated in under 'print'.

The latest Simplify 3D profiles can be downloaded using the following links:


Bolt Pro - Simplify3D settings

Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO EPLA
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO ABS
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO EPLA MIRROR-SYNC
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO HIPS-ABS
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO PETG
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO PVA-EPLA.

To use the profiles, choose File, then Import FFF Profile and be sure to select the correct profile in your process. You can also watch this video.

Demo Print Downloads

Drivers Downloads

Slicer Software

Firmware Downloads

Go to firmware instruction page

Request more information on the Bolt (Pro) firmware and how to update this via the Ticket System

Bolt (Pro) Video Library

The following instruction videos van be found here or on youtube: