The Leapfrog Bolt and Bolt Pro series both have a touchscreen that can be used to operate the user-interface. Below you can find more information about the specifications and options for replacement. 



Display type: Waveshare

Display type: Raspberry PI

Bezel is NOT flush with display.





Bezel flush with display

Manufacturer: Waveshare
Type: 7 Inch HDMI LCD / DIY1204
Resolution: 1024 x 600
Manufacturer: Raspberry PI
Type: RASPBERRYPI-DIS
Resolution: 800 x 480

When replacing this type of display we recommend using the 3D Printed LPFRG-Waveshare-bezel and LPFRG-Waveshare-displayframe. 

For removal of the existing display, please find the pdf manual on the bottom of this page.

For installing a replacement display kit, please see find the details

Required tools and fixtures:
  • 3mm drill
  • 4 x M3 x 30 (countersunk head)
  • 4 x M3 x 20 (socket head)
  • 8 x M3 lockingnut
  • Allen key: 2
  • LPFRG-Waveshare-bezel (STL download on bottom page)
  • LPFRG-Waveshare-displayframe (STL download on bottom page)