Modified on: Tue, 11 Feb, 2020 at 10:52 AM
In the attachment you will find the document that describes how to calibrate the wiper blades. The wiper blades are responsible for removing filament that is sticking underneath the nozzle. 
Did you find it helpful? Yes No
Send feedbackPrint settings in the Creatr software can be directly updated in under 'print'.
The latest Simplify 3D profiles can be downloaded using the following links:
Bolt Pro - Simplify3D settings
To use the profiles, choose File, then Import FFF Profile and be sure to select the correct profile in your process. You can also watch this video.
Any driver update for the Bolt (Pro)can be directly downloaded and installed using the User Interface. Go to Settings > Update and be sure to be connected to the internet.
Refer to the Bolt User Manual for more information or request a ticket via the Ticket System.
Go to firmware instruction page
Request more information on the Bolt (Pro) firmware and how to update this via the Ticket System
The following instruction videos van be found here or on youtube: