Or call our technical support: +31 (0) 172 503 622

Available Monday through Friday from 8AM to 4:30PM CET
Please create a ticket before calling and keep the ticket number at hand.
At the moment we are only offering support in English, so we kindly ask you to address your issue in English.

Maintenance

Replacement: X-motor/endstop Cables
This solution article will describe how both X-motor/endstop Cables can be replaced. Tools and Parts: The needed tools and parts for this maintenance a...
Fri, 14 Feb, 2020 at 4:32 PM
Cleaning Extruder Drive Gear
In the attachment you will find the document that describes how to clean the extruder drive gear. The extruder drive gear is in direct contact with your fil...
Tue, 11 Feb, 2020 at 10:35 AM
Adjustment: Z-min endstop
Description This solution will describe how to adjust the Z-min endstop. When installing a different print-bed or surface, we advice to follow this procedu...
Tue, 18 Feb, 2020 at 2:25 PM
Replacement: Print bed
In the attachment you will find the document how to replace the Bolt PRO printbed. This document can also be used as a guideline when installing a tech bed ...
Mon, 17 Feb, 2020 at 8:41 PM

User Manual

Quick Start Guide

Print Settings

Print settings in the Creatr software can be directly updated in under 'print'.

The latest Simplify 3D profiles can be downloaded using the following links:


Bolt Pro - Simplify3D settings

Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO EPLA
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO ABS
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO EPLA MIRROR-SYNC
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO HIPS-ABS
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO PETG
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO PVA-EPLA.

To use the profiles, choose File, then Import FFF Profile and be sure to select the correct profile in your process. You can also watch this video.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Go to firmware instruction page

Request more information on the Bolt (Pro) firmware and how to update this via the Ticket System

Bolt (Pro) Video Library

The following instruction videos van be found here or on youtube: