Repair Instructions

Replacement: X-motor/endstop Cables
This solution article will describe how both X-motor/endstop Cables can be replaced. Symptoms when defective Defecte X-motor cables can cause X-motor ...
Thu, 24 Mar, 2022 at 9:41 AM
Replacement: Printhead Internal Tubing
This solution article will describe how both inner printhead tubes can be replaced on a Leapfrog Bolt PRO  Tools:  The needed tools for this maintenanc...
Mon, 10 Feb, 2020 at 12:11 PM
Replacement: Printhead PCB
In the attachment you will find the document how to replace the head pcb's on the Bolt. 20171027_Leapfrog_Work_Instruction_Head_PCB_Replacement_v2.pdf
Thu, 6 Feb, 2020 at 9:26 PM
Replacement: Printhead Cable Chain
Please follow the attached instructions to replace the ethernet cables.
Thu, 6 Feb, 2020 at 9:18 PM
Replacement: E-Motor (Printhead Extrusion)
This article will show you how to replace a printhead drive unit stepper motor Step 1 - Disconnect the wire harness of the stepper motor marked in gree...
Thu, 20 Feb, 2020 at 10:31 AM
Replacement: Z-motor
In the attachment you will find the document that describes how to replace the Z-motor.
Tue, 11 Aug, 2020 at 10:00 AM
Replacement: X-motor
This solution article will describe how you can replace a Leapfrog Bolt (PRO) X-motor.  Tools and Parts: The needed tools and parts for this maintenanc...
Mon, 27 Jul, 2020 at 3:27 PM
Replacement: Z-spindle
Please follow the attached instructions for spindle(s) replacement.
Tue, 11 Feb, 2020 at 10:21 AM
Adjustment: Z-min endstop
Description This solution will describe how to adjust the Z-min endstop. When installing a different print-bed or surface, we advice to follow this procedu...
Tue, 18 Feb, 2020 at 2:25 PM
Replacement: Print bed
In the attachment you will find the document how to replace the Bolt PRO printbed. This document can also be used as a guideline when installing a tech bed ...
Mon, 17 Feb, 2020 at 8:41 PM

User Manual

Quick Start Guide

Print Settings

Print settings in the Creatr software can be directly updated in under 'print'.

The latest Simplify 3D profiles can be downloaded using the following links:


Bolt Pro - Simplify3D settings

Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO EPLA
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO ABS
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO EPLA MIRROR-SYNC
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO HIPS-ABS
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO PETG
Leapfrog Bolt Pro E3D – V1.3 Leapfrog Bolt PRO PVA-EPLA.

To use the profiles, choose File, then Import FFF Profile and be sure to select the correct profile in your process. You can also watch this video.

Demo Print Downloads

Drivers Downloads

Slicer Software

Firmware Downloads

Go to firmware instruction page

Request more information on the Bolt (Pro) firmware and how to update this via the Ticket System

Bolt (Pro) Video Library

The following instruction videos van be found here or on youtube: