Please make sure you are running at least software version 1.3.0
Step 1 – Connect the keyboard
to the Bolt and enter Linux
Turn on the Bolt and wait for it to complete startup. Connect the USB keyboard to the front USB connector on the Bolt. Press the Ctrl+Alt+F1 keys all at the same time. The display will turn black and put you in a Linux login:
Step 2 – Enter login credentials
On the screen you are prompted for login credentials. Please use
as the login name, followed by
as the password. You will now get a Linux prompt:
Step 3 – Rotate the screen
In the Linux prompt, type the following command exactly as shown (including the preceding dot and forward slash)
And then press enter.
type the command
The machine should now reboot and the normal interface should apair again. with the correct orientation.
Technical Support Engineer