Work Instruction – Bolt Drag Chain Replacement : Leapfrog Product Support Center

How can we help you today?

Or call our technical support: +31 (0) 172 503 622

Available Monday through Friday from 8AM to 4:30PM CET
Please create a ticket before calling and keep the ticket number at hand.
At the moment we are only offering support in English, so we kindly ask you to address your issue in English.

Work Instruction – Bolt Drag Chain Replacement

Modified on: Thu, 2 Nov, 2017 at 9:35 AM

Please follow the attached instructions to replace the ethernet cables.

pdf

20170405_Lea...

(2.17 MB)

Did you find it helpful? Yes No

User Manual

Bolt and Bolt Pro User Manual

Quick Start Guide

Print Settings

Print settings in the Creatr Software can be directly updated in under 'print'.

The latest Simplify 3D profiles can be downloaded using the following links:

Bolt - Simplify3D settings: Leapfrog Bolt – V1.0 – Sync, Mirror; Leapfrog Bolt – V1.0 – PLA, ABS, FLEX; Leapfrog Bolt – V1.0 – Polypropylene
Bolt with Bolt Pro Hotends – Simplify3D settings: Bolt with Bolt Pro Hotends - V1.2 - PLA, EPLA, Hybrid, PET-G; Leapfrog Bolt with BP Hot Ends – V1.1 – ABS, Nylon; Leapfrog Bolt with BP Hot Ends – V1.1 – Flex; Leapfrog Bolt with BP Hot Ends – V1.1 – Polypropylene
Bolt Pro - Simplify3D settings: Leapfrog Bolt Pro – V1.2 – PLA, EPLA, Hybrid, PET-G; Leapfrog Bolt Pro – V1.1 – ABS, Nylon; Leapfrog Bolt Pro – V1.1 – Flex; Leapfrog Bolt Pro – V1.1 – Polypropylene; Leapfrog Bolt Pro E3D – V1.2 – PLA, EPLA, Hybrid, PET-G; Leapfrog Bolt Pro E3D – V1.1 – ABS, Nylon; Leapfrog Bolt Pro E3D – V1.1 – Flex; Leapfrog Bolt Pro E3D – V1.1 – Polypropylene

To use the profiles, choose File, then Import FFF Profile and be sure to select the correct profile in your process. You can also watch this video.

Demo Print Downloads

Drivers Downloads

Any driver update for the Bolt (Pro)can be directly downloaded and installed using the User Interface. Go to Settings > Update and be sure to be connected to the internet.

Refer to the Bolt User Manual for more information or request a ticket via the Ticket System.

Software Downloads

Simplify 3D - Paid Download

Firmware Downloads

Go to firmware instruction page

Request more information on the Bolt (Pro) firmware and how to update this via the Ticket System

Bolt (Pro) Video Library

The following instruction videos van be found here or on youtube:

How to unbox the Bolt Pro
How to calibrate your Bolt Pro
How to start printing on the Bolt Pro
How to remotely access your Bolt Pro
How to 3D print with soluble support
How to 3D print with flexible materials
How to swap filament on the Bolt Pro
How to swap hot ends on the Bolt Pro
How to use sync/mirror mode on the Bolt Pro