The printing temperature you are using is actually more close to the temperature used to print ABS.
PLA printing requires, 210 degrees fr the hot ends and 40 degrees for the bed. Also make sure that the speed % for the first layer is between 20 to 30% of the default printing speed.
Ok I would suggest having a look at the link below as well:
The adhesive side of the sticker is for the glass bed not for the printed model:
Print settings in the Creatr Software can be directly updated in under 'print'.
The latest Simplify 3D profiles can be downloaded using the following links:
Bolt - Simplify3D settings
Bolt Pro - Simplify3D settings
To use the profiles, choose File, then Import FFF Profile and be sure to select the correct profile in your process. You can also watch this video.
Request more information on the Bolt (Pro) firmware and how to update this via the Ticket System
Bolt Pro Firmware