I am having a problem with my CreatrHS when I try printing 2 different
materials. When both materials are being print, the part will tilt
forward and to the right (X+, Y-) As far as I know, this is a new
problem, but I haven't tried using both extruders in a while.
I upgraded to the new firmware, and also simplify3d 3.0
Long story short, I noticed this when doing prints with support. I tried making a few calibration pieces like this one:
Dear Trevor what I would suggest is try adjusting the offsets using the steps in the link below:
You can use the old firmware version for the next link to reflash the firmware until you find the proper offsets and then implement them in the 2.2 firmware through the M50 command.
It is a bit complicated as you have to use the older version of the firmware but this will let us know is the offsets are indeed the root cause.
Let me know if this works.
Print settings in the Creatr Software can be directly updated in under 'print'.
The latest Simplify 3D profiles can be downloaded using the following links:
Bolt - Simplify3D settings
Bolt Pro - Simplify3D settings
To use the profiles, choose File, then Import FFF Profile and be sure to select the correct profile in your process. You can also watch this video.
Request more information on the Bolt (Pro) firmware and how to update this via the Ticket System
Bolt Pro Firmware