Recently swapped materials from PETG to ABS on my left hotend, but have since had problems with what I would call layering (not sure of the terminology here).
I'm running 0,15 mm layer height, and print speed 1500mm/min, the settings are the exact same from what I can see that use to work super. But now I don't seem to get even near the same quality prints as I used to.
At first I thought it was the x-carriage belt that had come loose, but this has been checked and retighten without any change.
I'm running the same sort of filament as I used to prior to the change.
Any one got any ideas ?
Print settings in the Creatr Software can be directly updated in under 'print'.
The latest Simplify 3D profiles can be downloaded using the following links:
Bolt - Simplify3D settings
Bolt Pro - Simplify3D settings
To use the profiles, choose File, then Import FFF Profile and be sure to select the correct profile in your process. You can also watch this video.
Request more information on the Bolt (Pro) firmware and how to update this via the Ticket System
Bolt Pro Firmware