Or call our technical support: +31852080825

Available Monday through Friday from 7AM to 3:30PM CET
Please create a ticket before calling and keep the ticket number at hand.
At the moment we are only offering support in English, so we kindly ask you to address your issue in English.
Start a new topic

Lubricating filament for the Creatr HS to reduce the friction in the bowden cables

Hi All,


I have come across a few articles on other sites with good details how to implement this.


I wondered what experience other have had with this and what the outcome was, hopefully positive?


I would be grateful for feedback (for or against) this idea to understand and make a better informed decision if it is something that I might consider testing this further.


Thanks for any thoughts and suggestions.


Kind regards


David

Login or Signup to post a comment

User Manual

Quick Start Guide

Print Settings

Print settings in the Creatr Software can be directly updated in under 'print'.

The latest Simplify 3D profiles can be downloaded using the following links:

Bolt - Simplify3D settings

Bolt - Sync and Mirror Profile
Bolt - PLA, ABS Flex Profile
Bolt - Flex Profile V.1.1
Bolt - PolyPropylene Profile

Bolt Pro - Simplify3D settings

Bolt Pro - V1.1 - PLA, EPLA, Hybrid, PET-G Profile
Bolt Pro - V1.1 - Flex Profile
Bolt Pro - V1.1 - ABS Nylon Profile
Bolt Pro - V1.1 - PolyPropylene Profile
Bolt Pro - V1.1 - SS(0.5mm) Carbon, Wood Profile

To use the profiles, choose File, then Import FFF Profile and be sure to select the correct profile in your process. You can also watch this video.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Request more information on the Bolt (Pro) firmware and how to update this via the Ticket System

Bolt Firmware

Download the Bolt 2.8.2 firmware here

Bolt Pro Firmware

Download the Bolt Pro 2.8.2 firmware here

Bolt (Pro) Video Library