When downloaded, PID tuning file appears as a *.stl file on the computer, but then copied on flash drive and put into Creatr HS cannot be found by the printer.
Just change the extension from stl to gcode and should work.
Dear Valerii Demianchuk,
In regards to your PID question at this point I would suggest you do a full software and firmware update for your HS printer. You can find the links explaining how to do this below:
Once the software and firmware are done you need to remember to input the offsets for the hot ends:
Let me know if this improves the quality of your prints.
Print settings in the Creatr Software can be directly updated in under 'print'.
The latest Simplify 3D profiles can be downloaded using the following links:
Bolt - Simplify3D settings
Bolt Pro - Simplify3D settings
To use the profiles, choose File, then Import FFF Profile and be sure to select the correct profile in your process. You can also watch this video.
Request more information on the Bolt (Pro) firmware and how to update this via the Ticket System
Bolt Pro Firmware