Hello guys !!! I wanted to ask if you have ever avuyo this problem? 90% of the time I can not finish printing. Use filaments colorfabb (pla) ... and each time the thread jams and printing stops.
Also, I do not know if it is normal, but as seen in imag0731 know the temperature of the metal roof is very high,
I updated the PID and the temperature increased to 220 but the problem recurred. I can not make prints more than 2 hours long. other tips?
Print settings in the Creatr Software can be directly updated in under 'print'.
The latest Simplify 3D profiles can be downloaded using the following links:
Bolt - Simplify3D settings
Bolt Pro - Simplify3D settings
To use the profiles, choose File, then Import FFF Profile and be sure to select the correct profile in your process. You can also watch this video.
Request more information on the Bolt (Pro) firmware and how to update this via the Ticket System
Bolt Pro Firmware