This is my first post, i need some help i bought a used creatr dual, and i been using repetier to try to control it, but i cant move the motors or preheat the extruders in manual mode.
I check every connection and use a test program for ramps and all motors work correctly, so it dosent for conections.
Please some help i want start to print.
David Barrero J.
Print settings in the Creatr Software can be directly updated in under 'print'.
The latest Simplify 3D profiles can be downloaded using the following links:
Bolt - Simplify3D settings
Bolt Pro - Simplify3D settings
To use the profiles, choose File, then Import FFF Profile and be sure to select the correct profile in your process. You can also watch this video.
Request more information on the Bolt (Pro) firmware and how to update this via the Ticket System
Bolt Pro Firmware