I just clean nozzle of extruder and when i fix it back the temperature stop raising.
i verified the heaters its fine but still when i put heater back to the printer it will not work.
Please some one advise me on this issue
My whats-app number is +966597733640 please send me your suggestion.
Dear asim ali,
Is the thermistor connector tightly in its place? As well, is your software reading the room temperature or is it showing 0 C; do you see in the "Communication" tab any M999 error; when heating the extruder, does the led from the electronic board corresponding to the E0/E1 (whichever you have the problem with) thermistor mosfet light up?
Print settings in the Creatr Software can be directly updated in under 'print'.
The latest Simplify 3D profiles can be downloaded using the following links:
Bolt - Simplify3D settings
Bolt Pro - Simplify3D settings
To use the profiles, choose File, then Import FFF Profile and be sure to select the correct profile in your process. You can also watch this video.
Request more information on the Bolt (Pro) firmware and how to update this via the Ticket System
Bolt Pro Firmware