Anybody getting a juddering or stuttering from the filament feed when printing small or complicated parts, its not a blockage as it works fine on longer runs, also occurs on the skirt and sometimes pauses in a print briefly depositing a lump right in the wrong place?
I have the same, I reduced the print speed to 2000mm/min, to remedy. I sent a support ticket to lpfrg, the sent me two new "drivers" (extruders).
I haven't tried them yet.
are new settings for communication follow link http://creatrhs.lpfrg.com/support/solutions/articles/1000167291-how-to-configure-simplify-3d-for-better-connection-to-the-pc
This adjusts the buffer rate for communication between computer and printer now no juddering.
Why cant leapfrog email customers of these changes instead of having to stumble upon them randomly?
Better temperature control
Updated Display for easier connection between computer and printer
Hope this helps
Print settings in the Creatr Software can be directly updated in under 'print'.
The latest Simplify 3D profiles can be downloaded using the following links:
Bolt - Simplify3D settings
Bolt Pro - Simplify3D settings
To use the profiles, choose File, then Import FFF Profile and be sure to select the correct profile in your process. You can also watch this video.
Request more information on the Bolt (Pro) firmware and how to update this via the Ticket System
Bolt Pro Firmware