After a few times taking the fan duct up and down of the head I came up with the thing loose and partially melted. Could anybody share the stl file, so I get the new one printed, please?
Dear Valerii Demianchuk,
See attached file for the fan duct .stl
Sory, Alina P, could you check the link, coz it is just a cube.
After downloading the .stl file that I sent you and opening it, this is the object shown in Simplify.
Thanks for fast reply! Dunno what I did wrong 1st time - now its fine!
I made a better fan duct, it has less chance of touching the heated blocks. Survives longer but still not indefinitely. Enjoy.
P.S: In this repo you'll find other upgrades to the Creatr HS you might like.
Leapfrog Team this should be made available in the Knowledge Base for Printable Parts
Please check this solutions link out:
Print settings in the Creatr Software can be directly updated in under 'print'.
The latest Simplify 3D profiles can be downloaded using the following links:
Bolt - Simplify3D settings
Bolt Pro - Simplify3D settings
To use the profiles, choose File, then Import FFF Profile and be sure to select the correct profile in your process. You can also watch this video.
Request more information on the Bolt (Pro) firmware and how to update this via the Ticket System
Bolt Pro Firmware