i didnt like the original nozzle cooler ( because it melted all the time) so I designed a new one.
I will make another different one because I dont like the 1 sided cooling, it is not optimal for ninjaflex. the uncooled side will stay too hot and deform.
are you getting the HS to print with ninja flex?
I thought it would not work with the bowden extruders.
hi yes I can print a little with ninjaflex but it needs some transformations, also a 0,5mm nozzle and the result is not very clean or precise. and it is VERY slow. max 1000mm/min
you need to make a new part to connect the top bowden fitting to the extruder motor. means you need to remove the motor..(its quite simple) I will post the plan of the part later.
Here is my duo cooler nozzle.
it cools the nozzles from left and right side simultaneously.
check this thread for the soft filament adapter : http://creatrhs.lpfrg.com/support/discussions/topics/1000052457
here is a slightly improved duofan nozzle cooler but it still need some work I think
Print settings in the Creatr Software can be directly updated in under 'print'.
The latest Simplify 3D profiles can be downloaded using the following links:
Bolt - Simplify3D settings
Bolt Pro - Simplify3D settings
To use the profiles, choose File, then Import FFF Profile and be sure to select the correct profile in your process. You can also watch this video.
Request more information on the Bolt (Pro) firmware and how to update this via the Ticket System
Bolt Pro Firmware