Or call our technical support: +31852080825

Available Monday through Friday from 7AM to 3:30PM CET
Please create a ticket before calling and keep the ticket number at hand.
At the moment we are only offering support in English, so we kindly ask you to address your issue in English.
Start a new topic

Stops printing mid print

the Printer stops printing prematurely. the part isn't finished but the print bed is lowered. as it is a 9 hour print and was done over night i can't say anything about what happend. furthermore i printed two other parts using the same gcode. any suggestions    


Look motor of filament, we have strange problem with one, it is blocked.

Hennag Hansen did you figure this out?


-B

Hello Hennag, i can probably say that the extruder got blocked or the filament was entangled on the spool and the machine stoped extruding at some point.

Login or Signup to post a comment

User Manual

Quick Start Guide

Print Settings

Print settings in the Creatr Software can be directly updated in under 'print'.

The latest Simplify 3D profiles can be downloaded using the following links:

Bolt - Simplify3D settings

Bolt - Sync and Mirror Profile
Bolt - PLA, ABS Flex Profile
Bolt - Flex Profile V.1.1
Bolt - PolyPropylene Profile

Bolt Pro - Simplify3D settings

Bolt Pro - V1.1 - PLA, EPLA, Hybrid, PET-G Profile
Bolt Pro - V1.1 - Flex Profile
Bolt Pro - V1.1 - ABS Nylon Profile
Bolt Pro - V1.1 - PolyPropylene Profile
Bolt Pro - V1.1 - SS(0.5mm) Carbon, Wood Profile

To use the profiles, choose File, then Import FFF Profile and be sure to select the correct profile in your process. You can also watch this video.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Request more information on the Bolt (Pro) firmware and how to update this via the Ticket System

Bolt Firmware

Download the Bolt 2.8.2 firmware here

Bolt Pro Firmware

Download the Bolt Pro 2.8.2 firmware here

Bolt (Pro) Video Library