I just started printing with Simplify3D Software and went through all the checks with the "X", "Y", & "Z" jogging and it all seems to work until I press the "Start Job" icon. The screen shows the printing process but the Creatr3d just stutters and doesn't move!!!
What did I forget to do.
And what will happen if you try printing with Repetier, just to check?
Well----I found out that the extruder temperature was, some how, turning off after making several layers and when it cooled down, of course, no filament was being extruded. So I would have to stay around and reset the temperature 2 or 3 times then it would complete the print.
Did you check the temp settings in simplify and check if al settings are on the choosen extruder ( if you have a dual printer)
Still learning the printer and settings. I thought the settings on the "Manual Window" would set the temp. Didn't know I needed to go to the set-up section to set them up.
How did you solve this problem ?
Print settings in the Creatr Software can be directly updated in under 'print'.
The latest Simplify 3D profiles can be downloaded using the following links:
Bolt - Simplify3D settings
Bolt Pro - Simplify3D settings
To use the profiles, choose File, then Import FFF Profile and be sure to select the correct profile in your process. You can also watch this video.
Request more information on the Bolt (Pro) firmware and how to update this via the Ticket System
Bolt Pro Firmware