I accidentally shorted one of the heater wires to the chassis as I was troubleshooting the latest problem with my Creatr. Sparks flew.
Now the printer will not connect and there is constant beeping from the power supply (the beeping stops if I pull the 4-pin PS connector on the main board.
Anyone know what may have been damaged and how to correct it?
I can replace any of the PCB components if needed if they can be identified!
Print settings in the Creatr Software can be directly updated in under 'print'.
The latest Simplify 3D profiles can be downloaded using the following links:
Bolt - Simplify3D settings
Bolt Pro - Simplify3D settings
To use the profiles, choose File, then Import FFF Profile and be sure to select the correct profile in your process. You can also watch this video.
Request more information on the Bolt (Pro) firmware and how to update this via the Ticket System
Bolt Pro Firmware