I want to print transparant and ordered T Glass filament. I found out it needs a minimum nozzle of .5/.6 mm or higher
and settings are layer thickness .5 mm speed 960 mm/h. and temp 220
Cabn i also run it with a .35 mm nozzle or wil it create to much pressure ?
Print settings in the Creatr Software can be directly updated in under 'print'.
The latest Simplify 3D profiles can be downloaded using the following links:
Bolt - Simplify3D settings
Bolt Pro - Simplify3D settings
To use the profiles, choose File, then Import FFF Profile and be sure to select the correct profile in your process. You can also watch this video.
Request more information on the Bolt (Pro) firmware and how to update this via the Ticket System
Bolt Pro Firmware